Using Metal Roofing Installation Instructions To Lay Your New Roof
Laying a new roof is something that is best left to the professionals, but if you want to use the more costly metal roofing that is now readily available, you can learn how to install it yourself using the simple metal roofing installation instructions highlighted below. This will save you money and will not take too long as the process is a simple and fast one. Here are the main things that you need to keep in mind when reading the metal roofing installation instructions.
Remember that when you are using this guide you will have to do some further research into how to install metal roofs so that you ensure the safety and security of the structure. The basics however, will be covered so that you can get a better understanding for how the installation process works for different types of roofing material.
The first thing that you have to do is organize your materials and decide on the specific metal roof covering that you want. standing seam metal roofing is used predominantly for creating a contemporary, industrial look. This is also one of the easiest types of metal roofs to install and can be used for commercial and residential purposes. Be sure to check out the metal roofing installation instructions for the correct methods to use.
The first step in laying this and any other type of metal roofing is to clear the roof of all debris and dirt. Then you will get the underlayment in place ready for the covering. The second step is to apply the eave starter strip. When you are looking to install metal roofing over asphalt singles, a slightly different process will have to be used.
Moving onto the laying of the metal sheeting is to install the gable edge trim, as well as the flashing and the valleys. You will make use of a return flange for the flashing of a metal roof because this provides an effective water runoff.
After you have done this, the next step in the metal roofing installation instructions is to prepare the shingles and the hip caps for installation. The shingles need to be laid carefully with the bottom shingles notched to ensure correct water runoff. Each shingle has to be nailed down with a special clip to the outer edge of the return flange. Likewise the shingles need to be fastened to the flashing with a quarter inch gap between the edge of the shingle and the inside of the flashing.
The last step in the installation guide for metal roofing is to start laying the shingles from the outside and work your way up from the bottom. It is also necessary to work to the left at all times and use a consistent pattern of different size shingles. You can also add siding corners if you want to.
The main thing to keep in mind with installing a standing seam metal roof or any other metal roofing is that you should use the correct safety harness, helmet, roof anchors, and other roof protection gear. Using these metal roofing installation instructions you can get your new roof completed today!
